S2M Kuvvet Sensörü [10 N … 1000 N]

Compelling ruggedness and reliability during use

Thanks to its IP67 degree of protection, the S2M force transducer provides reliable and safe measurement results even in harsh environments. Theintegrated mechanical overload stops allow specification of a breaking load of up to 1000% of its nominal (rated) force in both tensile and compressive direction. The S2M force transducer offers excellent specifications in terms of linearity, hysteresis error and temperature behavior.

Small measurement uncertainty, 2 mV/V output signal: increased efficiency in force measurement

Another plus is the S2M’s high accuracy class of 0.02 or, respectively, its outstandingly small measurement uncertainty. Small measurement uncertainty is a prerequisite for increased efficiency in your production and measurement tasks (read our technical article). Accuracy is key to the S2M’s flexible cable as well; it has very little impact on the measurement result and allows setting up of cable chains.

S2M operates with 2 mV/V output signal, even with very small nominal (rated) measuring ranges of 10 N. In concrete terms this means that you do not have to compromise on measurement quality when using standard amplifiers, since you utilize the full input range and thus maintain signal quality. More reliable measurement results and clear cost benefits for you – through optimized sensor design!

The force transducer can be optionally fitted with TEDS – the transducer electronic data sheet.

Note: S2M is the successor to the S2 force transducer from HBM.

Do you want to measure higher forces?

All the benefits provided by S2M for higher nominal (rated) measuring ranges from 500 N bis 50 kN: S9M force transducer from HBM