Açıklama
Product Specifications
Physical
Size: 9.2″W x 9.7″L x 1.3″H (23cmW x 25cmL x 3.3cmH)
Weight: 4.4lbs (2.0kg)
Temperature: -20° to 65° C
Connectors: (16) Somat M8 Female Bulkhead Connector
Inputs
Range:
Minimum full-scale: ±62.5mV
Maximum full-scale: ±80V
Input Impedance:
10MΩ = Ranges up to +/- 10V
100kΩ = Ranges greater than +/- 10V
Resolution: 16-bit ADC, across specified full-scale range
Sample Rates: Independently set
100 kHz Master Clock= 0.1 Hz to 100 kHz
98.3 kHz Master Clock= 0.1 Hz to 98,304Hz
Transducer Power: 3V to 28V in 1V increments, 400mW per channel
Filtering:
Analog: 25 kHz, 8-pole Butterworth low-pass filter
Digital: Software selectable; 8-pole Butterworth and Linear Phase
Includes
(16) Somat SAC-TRAN-MP-2 Transducer Cables (2 m)
Product Options
Somat eDAQ Simultaneous High Level Layer, Analog Out (EHLS-AO)
The Somat eDAQ Simultaneous High Level Layer, Analog Out (EHLS-AO) outputs are conditioned analog output signals that can be used in the creation of time-domain lab durability tests. When setting up the laboratory simulation, the Somat eDAQ system is brought into the lab with the component or vehicle. This practice is highly recommended, as it ensures that all of the transducer instrumentation and properties are exactly the same for the lab simulation as they were for the field data collection. Instead of being recorded, the analog-out signals are sent as time series data for the test rig to analyze. The controller can then develop drive files that are played into the test rig, reproducing exact field dynamics in the lab.
Benefits:
Consistency/Accuracy
The same signal conditioning, set-up file, and calibrations used in both the field and lab.
Ease of Set-up
Configure the eDAQ once, use it in both applications. The Analog Output Calibration File is directly compatible with popular simulation software.
Includes
(1) Somat SAC-TRAN-AO-2 Analog Output Cable
Part Number Code
The following number scheme is used to identify the layer configuration.
EHLS – XX
eDAQ Layer EHLS
Options
B = Base Layer. AO = Analog Out.
Cables and Accessories
Breakout Box, Analog Out
The SoMat Analog Output Box (EBB-AO) is a breakout box for the analog output option on the eDAQ EHLS and EBRG layers.
ICP-Type Signal Conditioning Module
The Somat ICP-Type Signal Conditioning Module (EICP) is a part of a family of signal conditioners for the eDAQ and eDAQlite HLS layers.
M8 Hex Nut Wrenches
The Somat M8 Hex Nut Wrenches (HDW-0034-00) work with the Somat M8 transducer and extension cables for both the eDAQ and eDAQlite.
Strain SMART Module
The Somat Strain SMART Module (SMSTRB4-xxx) is a part of a family of signal conditioners for the eDAQ and eDAQlite HLS layers. The Strain SMART Module provides excellent strain gauge signal conditioning with support for ¼-‚ ½- and full-bridges.
Thermocouple SMART Module
The Somat Thermocouple SMART Module (SMITC) is a part of a family of signal conditioners for the eDAQ and eDAQlite HLS layers.
Extension Cable (0.4 m)
The Somat SAC-EXT-MF-0.4 Extension Cable (SAC-EXT-MF-0.4) is a high-quality 0.4 meter pre-molded cord et with Male/Female SoMat M8 connectors.
Extension Cable (2 m)
The Somat Extension Cable (SAC-EXT-MF-2) is a high-quality 2 meter pre-molded cord set with Male/Female Somat M8 connectors.
Extension Cable (5 m)
The Somat SAC-EXT-MF-5 Extension Cable (SAC-EXT-MF-5) is a high-quality 5 meter pre-molded cord set with Male/Female Somat M8 connectors.
Extension Cable (10 m)
The Somat SAC-EXT-MF-10 Extension Cable (SAC-EXT-MF-10) is a high-quality 10 meter pre-molded cord set with Male/Female Somat M8 connectors.
Extension Cable (15 m)
The Somat SAC-EXT-MF-15 Extension Cable (SAC-EXT-MF-15) is a high-quality 15 meter premolded cord set with Male/Female Somat M8 connectors.
Transducer Cable, Analog Out (2 m)
The SoMat Analog Out Transducer Cable (SAC-TRAN-AO-2) is a high-quality pre-molded cord set with tinned pigtail wires for transducer wiring.
Transducer Cable (2 m)
The Somat Transducer Cable (SAC-TRAN MP-2) is a high-quality 2 meter pre-molded cord set with tinned pigtail wires for transducer wiring.
Transducer Cable (10 m)
The Somat Transducer Cable (SAC-TRAN-MP-10) is a high-quality 10 meter pre-molded cord set with tinned pigtail wires for transducer wiring.
SPT-HLS Adapter, G 1/4 (F) to SAE6 (M)
The SoMat SPT-HLS Adapter, G 1/4 (F) to SAE6 (M) (SPT-SAE6ADAPT) is designed to work with SoMat’s line of Pressure Transducers (SPT-HLS).
Part Number: SPT-SAE6ADAPT
SPT-HLS Adapter, G 1/4 (F) to 1/4 NPT(M)
The SoMat SPT-HLS Adapter, G 1/4 (F) to 1/4 NPT(M) (SPT-1/4NPTADAPT) is designed to work with SoMat’s line of Pressure Transducers (SPT-HLS).
Part Number: SPT-1/4NPTADAPT
E-AC/15 – 15-Volt Power Supply
The E-AC/15 is a high-quality 15 volt DC power supply that provides power to an eDAQ or eDAQlite from a standard 120/240 volt supply.
Değerlendirmeler
Henüz değerlendirme yapılmadı.